Installation of high-quality American implants with a guarantee at the Zuub.RF clinic, working with even the most complex clinical cases

By the level of engraftment By the time of osseointegration By the volume of bone tissue Possibilities of prosthetics Indications and contraindications Types of implants TOP brands
Dental implantation is rapidly gaining popularity. Every year, about a million patients improve their quality of life and the aesthetics of their smile thanks to implants. There are dozens of brands and models on the service market, and they all compete with each other. Each pin released falls into a certain, albeit unofficial, category and affects the popularity of the brand. Dentists say that the best dental implantation is the one that suits the given clinical case. Why then does one implant cost 15 thousand rubles, and the other 60 thousand?

The price of an implant is influenced by many factors, primarily the manufacturer. Famous brands invest millions of dollars in research, development and search for new technologies. The high quality of their products is guaranteed, because products from well-known brands meet all the key parameters required for implants.

Let's consider what criteria influence the rating of dental implants.

Bicon implant installation process:

Stage 1. Preparation

At the initial consultation, the doctor examines and assesses the state of your oral health. The thickness and mobility of the mucous membrane, the condition of the jaws and bite are determined. Tests, radiography, and computed tomography are prescribed. Using tomography, a working model of the structure is developed, which is needed for the correct location of the system. Based on the results of the examination, a clinical picture and subsequent treatment plan are drawn up.

The doctor does professional cleaning - removing plaque and tartar. If there is a disease, sanitation is carried out - caries and other inflammatory processes are eliminated.

Stage. 2 Implant installation

The installation process according to the protocol is similar to other implantation methods. The artificial root is implanted under local anesthesia. The clinic uses effective pain relief methods; the patient will experience virtually no discomfort. The surgeon performs an osteotomy, prepares a section of bone to prepare the bed, and creates a socket into which the implant is implanted. The wound is closed and stitches are applied. The fixation procedure takes on average 50–60 minutes. If necessary, a temporary crown is installed - this will allow the patient to achieve an aesthetic smile during the period of osseointegration.

Stage. 3 Prosthetics

Restoration on Baikon implants is carried out using a one-step, two-stage technique. After osseointegration of the artificial root (3-6 months), an abutment, crown or bridge is installed. The healing period depends on the surgical procedure and the anatomical features of the jaws.

Implantation can be performed immediately after tooth extraction, or in the case of severe bone tissue atrophy - after a few months.

The unique design of the best American systems ensures successful regeneration of cortical bone at the neck of the product. This prevents the tissue from reabsorbing.

Design selection criteria

Root-shaped, conical structures made of titanium take root best. They help distribute the chewing load evenly.
Possibility of implantation without bone grafting.
Ease of installation reduces the rehabilitation period.
Availability of quality certificates.
A coating with microscopic pores is the key to rapid osseointegration. Often the surface is treated with crystals of hydroxyapatite and phosphates for better penetration of bone cells into the structure of the rod.
The best type of connection between the implant and the abutment is in the form of a micro-thread without a polished neck.
The aesthetic component plays an important role in the success of implantation. If chosen incorrectly, the metal structure will show through the gums or prosthesis.
In clinics working directly with the manufacturer, prices for systems are lower.
The qualifications of the implantologist must be confirmed by relevant documents. You can trust specialists, members of the European Association of Implantologists and the Russian Association of Dental Implantology.
The high status of the clinics is confirmed by a license to perform dental implantation and the availability of modern equipment.

Advantages of Bicon implants:

lack of threaded fasteners/elements;
small product size;
reliable fixation;
lifetime quality guarantee;
high survival rate (99%);
ease of installation, installation without a crown is possible;
the ability to perform express operations with instant loading;
hermetically sealed connections to prevent the formation of cavities.

The risk of rejection of an American implant tends to zero, since it is made of biocompatible materials. Beacon implants are a safe and painless restoration of teeth that work and look like natural ones. We received positive feedback from many doctors and patients.

The design has high aesthetic indicators. The patient will not encounter such a problem as a dark stripe on the neck of the tooth, which appears as a result of gum recession after prosthetic crowns.

Implants are a tightly connected structure. This structure ensures comfortable wearing and does not allow pathogenic organisms to develop at the site where the system is introduced.

The versatility and high level of stability allow the implants to be used even in difficult clinical situations. The shape of the artificial root is securely fixed in the socket, which in some cases does not require bone grafting.

Due to their biocompatibility, aesthetics and high durability, Bicon systems have gained popularity around the world.

American artificial roots Zimmer

Zimmer implants have been on the market for over 10 years. They are considered unique in their kind, having won the recognition and respect of patients and implantologists. The length of such implants ranges from 0.85 to 1.5 cm.

Features of American Zimmer implants:

Implants are produced from a unique tantalum material, which is characterized by increased survival characteristics in the bone;
Individual implant posts are made individually for each patient;
A series of implantation systems called 3I, for example, has a patented Osseotite coating, which helps accelerate the growth of native tissue around the implant;
An impeccable aesthetics of the final result is achieved.

Care

Implants require meticulous care

. You should regularly clean the denture with a soft brush, use rinses, dental floss, floss, undergo routine examinations, and follow all the dentist’s recommendations. Provided proper operation, the service life of the system is 15-20 years.

Implantologists at Dr. Razumenko’s clinic perform operations at the highest level, which reduces the risk of complications to a minimum. After surgery, the following are possible:

pain, swelling in the implant area;
minor bleeding;
increase in body temperature.

If the patient follows all medical recommendations, the pain and discomfort goes away quickly enough. In the first days after implantation.

If swelling occurs, ice should be applied to the implantation site.
In the first week, do not resort to increased physical activity.
Avoid intensive rinsing of the mouth, do not spit, and do not touch the implantation site with your tongue.
In the first days, doctors recommend avoiding alcohol consumption and quitting smoking.

All-on-6 for cancer and diabetes

Those patients who have some kind of malignant neoplasms and are undergoing treatment, if the patient is in remission and if this remission lasts more than 2 years and he tests tumor markers and everything is fine, then this patient can have implants installed, and we we install them.

Patients with diabetes are a fairly common disease now; we have many such patients.

Of course, we do not install implants as soon as the patient arrives and “everything is 6”, let us quickly install everything for you today - no, this is not our approach. The patient is interviewed, an anamnesis is collected, he is sent for tests, we look at sugar levels, what units, and communicate with the patient - this is type 1 diabetes, type 2 and we collect an anamnesis. And based on the anamnesis, we are already building a rehabilitation plan

How do you prepare for All-on-6 implantation?

Before starting the “all-on-6” operation, the patient sees an orthopedist. The orthopedist discusses in detail with the patient, finds out his wishes, assesses the situation, makes optical impressions, and sends him to CBCT in order to compare the optical impressions of the intraoral scanner and bone computed tomography.

And the complete rehabilitation is carried out first in digital form, when all the implants are placed in the right positions in the program, a surgical template is ordered, and we already know completely at the stage of the operation that everything has been predicted. We know in what place the implants will be installed, what diameter, what length, at what angle they will be installed, what orthopedic superstructure will be - this is necessary for fixing the prosthesis. That is, at the planning stages we do everything to eliminate force majeure during the operation and in order to get the result that we want to get - this is a good result.

What tests should be taken before All-on-6?

Before implantation of “all on 6”, we recommend that patients take a blood test, in which we will indicate both the patient’s sugar and hormonal parameters. And after this we can move on to further rehabilitation of the patient.

Prices for Bicon implants

Premium implants produced by the American company Bicon Dental Implants are distinguished by a reasonable price, excellent quality, durability and minimal risk of rejection. The final cost of this implant from the USA depends on the model, the equipment of the clinic, and the qualifications of the doctor. The average price in Moscow varies between 22-37 thousand rubles per unit.

Code no.	Name of procedures	Unit of measurement	Cost, rub.
101	Repeated treatment and diagnostic appointment of the patient	650,00
300	Application anesthesia	150,00
301	Infiltration anesthesia, conduction	550,00
653	Installation of Bicon implant (USA)	1 PC.	50 000,00

* The prices indicated on the website are not a public offer. The exact cost of treatment can only be determined at an appointment with a doctor.

Prices for treatment in Moscow full price list

Share on social media networks:

Article Expert:

Lavrentyev Sergey Sergeevich

Doctor - dentist, surgeon, implantologist. He regularly improves his professional level and studies modern methods of dental implantation and surgical dentistry at international seminars and conferences of outstanding implant surgeons in the world.

Work experience 25 years

Nobel Biocare Company

The patriarch of implantology, Nobel Biocare remains the leader in dental implants.

The origins of the company's creation were the first implantologist in the world - Swedish professor Brånemark, who installed the first dental implants for a patient. From Sweden, Nobel Biocare first moved to Switzerland, and then, as a result of a 2014 transaction, became part of the large Danaher concern (71,000 employees) and became American. Although some sources credit her with dual citizenship - the USA and Switzerland, this is in recognition of a famous brand. The quality of the products was not affected due to the company's relocation.

Nobel Biocare with Astra Tech and Straumann are still the world's top three implant manufacturers.