Adin implants: an inexpensive system with wide capabilities

Private dentistry offers clients a wide range of services for the diagnosis and treatment of oral diseases. In addition to standard options, we offer to install implants from Adin Dental Rus, a well-known Israeli manufacturer, which are in great demand all over the world.

The clinic has the most modern equipment, which is purchased from the world's leading manufacturers, and also offers clients comfortable conditions for waiting and performing various procedures. There is free Wi-Fi throughout the dental center, and you can also sit in a cozy waiting room with a cup of tea or coffee. Our clinic is located next to the Kyiv metro station in the very center of Moscow, so getting to it is not difficult. There is convenient parking for clients nearby.

Experienced doctors, who have been working as a close-knit team for many years, understand each other perfectly and solve complex issues together. Every day, four specialists work in one shift: a pediatric orthodontist, a surgeon, a therapist and an orthopedist. Here you can get the Israeli Adin implant and not worry about the risks: employees take the material out of sealed packages right in front of the patient.

Despite the fact that the clinic offers business class services, prices remain affordable and profitable for most clients.

Indications

Installation of Adin implants is indicated if a person has:

• Complete or partial edentia of both jaws (absence of teeth).
• The absence of one or more frontal teeth.
• End defect (absence of chewing teeth on both jaws).
• Bone deficiency, narrow alveolar ridge (usually a congenital defect).
• Pathological mobility of teeth due to insufficient hygiene, malocclusion.
• Increased tooth wear due to bruxism and pathological occlusion.
• Trauma to teeth with damage to the root and soft tissues.

In what clinical cases can the Adin system be used?

Implants from an Israeli manufacturer are used both in the absence of one tooth, in the loss of several teeth, and in cases of complete edentia. They can be loaded with single crowns, bridges, and complete dentures that restore the entire dentition (12-14 units).

The company has also developed implants with a special design. This is the narrowest TOUAREG™ UNP implant - with a diameter of only 2.75 mm - and the TOUAREG One™ implant for single-stage implantation, i.e. You can fix the prosthesis on it immediately after installation. They are designed for use in areas with little bone volume and for the restoration of maxillary lateral teeth and mandibular incisors.

Contraindications to implantation

• Diseases of the cardiovascular and nervous systems.
• Incoagulability of blood.
• Diabetes.
• Malignant neoplasms.
• Drinking alcohol, smoking.
• Carious lesions of teeth.
• Weakened immunity.
• Chemo- and radiation therapy.
• Osteoporosis.

Temporary restrictions on implantation of Adin constructs are pregnancy, breastfeeding, viral diseases and infectious inflammation, and periods of exacerbation of chronic pathologies.

Would you like us to call you back?

Rating of dental implants for those who want to understand

Survival rate

The main indicator in the ranking. The percentage of statistical survival of titanium rods is calculated in the course of large-scale studies conducted by competent independent organizations.

For top brands this figure is above 99%, for others it is slightly lower: from 95% to 98.8%. It is important to understand here that the more time the implantation system is used in clinical practice, the more reliable this figure is and it can be trusted.

Not everything depends on implants

The success of implant treatment also depends on the qualifications of the doctor and the patient’s compliance with recommendations during the rehabilitation period.

Osseointegration

The surface treatment technology of a titanium rod is the main factor influencing the speed and quality of its osseointegration (i.e. fusion with bone tissue). The success of treatment greatly depends on this.

For premium systems, osseointegration takes 1.5-2 months, for budget systems - 3-6 months.

Tested on a large sample

Leading manufacturers of implantation systems conduct extensive clinical trials proving the high rates of osseointegration of their titanium pins even in difficult situations, for example, in patients with diabetes or after radiation therapy.

Manufacturer's warranty

Only some manufacturers offer a lifetime warranty on their dental implants. If the artificial root is rejected after many years through no fault of the patient, the manufacturer undertakes to provide a replacement titanium rod free of charge.

Most companies provide a guarantee for their implantation systems for up to 10-20 years. Obviously, it is better to choose implants with a lifetime warranty from the manufacturer.

The guarantee is good, but it doesn’t work everywhere

Despite their reliability and lifetime warranty from the manufacturer, some implantation systems are not widespread in Russia or do not have an official representative office. If you choose them, you may encounter difficulties in delivering original components or obtaining a similar titanium rod under warranty if it is rejected.

Implant-abutment connection type

The service life of the artificial root depends on this factor. There are two types of connection: flat and conical. The best implants are those with a conical connection to an abutment.

Firstly, it removes the gap between the crown and the titanium rod, where microorganisms could enter and lead to rejection of the artificial root. Secondly, it will withstand heavy loads and will not cause bone resorption around the titanium pin.

Material

The survival rate of an artificial root depends on the purity of the titanium from which it is made. The most common is pure titanium Grade 4 (2% impurity content). Some manufacturers use Grade 5 - less pure, it contains impurities of vanadium (4%) and aluminum (6%). The presence of impurities increases the strength characteristics of titanium rods, but negatively affects the rate of osseointegration.

Orthopedic briefcase

Not only the aesthetics, but also the functionality of the treatment result depends on the breadth of choice of solutions for prosthetics. Each manufacturer has its own orthopedic portfolio. The richer it is, the better for the patient.

If you use some budget systems, for example Alpha Bio, in non-standard situations you will have to sacrifice aesthetics, since they do not have a wide selection of abutments and other elements for orthopedic solutions.

What are Adin implants

The Adin company launched its production in 1972 in Israel. The company's first clients at that time were the USA and the Middle East. The company got involved directly with implants about 30 years ago, and now Adin products can be found in service with almost every implantologist.

The company strives to create high-quality dental products and improve implant installation technologies that can significantly speed up the tissue healing process.

Adin provides doctors not only with high-quality instruments, but also with knowledge in the field of modern implantology. The company's research staff regularly organizes conferences, webinars and advanced training courses.

Advantages of Israeli dental implants

• A varied selection of dental systems and superstructures from popular manufacturers Alpha Bio, CORTEX, MIS, Adin;
• Survival rates approach 98%;
• In Israeli research centers, new products are constantly produced and the characteristics of already manufactured models are improved;
• Manufacturers from this country offer dental implants that can eliminate defects even in the most difficult cases:
• There are endosteal structures that are fixed into the bone, and subperiosteal structures, which are installed in the area between the periosteum and the jaw bone.

What is special about Adin implants?

Thanks to a carefully developed implant system, these structures can be implanted into atrophied tissue with a small bone volume.

Advantages of Adin implants:

• The products have quality marks and certificates that meet all international standards for implant products.
• Implants are made from the highest quality material, which minimizes the risk of rejection.
• OsseoFix coating ensures high rates of engraftment and a complete absence of allergic reactions.
• Thanks to the improved shape and thread, the implant is firmly fixed in the bone tissue.
• Due to the absence of an acidic composition on the threads, the design retains its original shape and structure for a long time.

Adin product varieties:

• Arrow one-Piece: one-piece support structures for crowns.
• Touareg: installed when there is a small amount of bone for implantation in one or two stages.
• Touareg-X: the shape of the implant promotes good adhesion of the mucous membrane to the top of the structure.
• Touareg-S: used for minimally invasive surgeries after preliminary sinus lift.
• Mini Oskar: relevant in orthodontic and orthopedic treatment.
• Swell: ensure uniform distribution of the load on the teeth in case of jaw anomalies.

The manufacturer guarantees the service life of implants from 5-10 years. With systematic oral care, structures can last more than 15 years.

Advantages and disadvantages of Adin implants

• Wide range of models
• Quite high quality of implants and components
• Possibility to carry out classical and one-stage implantation, as well as implement an immediate loading protocol
• High survival rate
• Low cost

• Lack of minimum implant sizes (the shortest models are 8 millimeters)
• When carrying out complex aesthetic restorations, Adin implants are inferior to top brands
• These implants are not among the top most popular systems, so they are not offered in all clinics

Prices for Israeli implants at the Elident clinic

It was previously noted that the cost of Israeli implants is considered a key advantage, indicating in favor of choosing these systems. In this case, the determining factors include: the rating of the manufacturer, the pricing strategy of dentistry and the characteristics of the manufactured model.

Manufacturers of Israeli dental implants

There are several known manufacturers of Israeli implants. At the same time, the cost of their fixation can reach 35 thousand rubles together with the installation of a metal-ceramic prosthesis.

Currently, products from the following manufacturers are in demand: Alpha Bio, ABDental Devices, Mis, Ards, Iterum and Adin.

In the manufacturer's catalogs you can also find bone tissue substitutes, orthopedic and surgical instruments and superstructures.

How to choose between root substitutes from two manufacturers?

So, what should you prefer, Korean or Israeli dental implants? Some experts believe that higher quality artificial roots are produced in Korea. But you need to understand that for successful implantation it is important not only to use reliable implants, but also to carry out this operation in a clinic with a good reputation and experienced specialists. Accurate adherence to the treatment protocol and the correct choice of model are also of great importance.

With increased bone density, it is advisable to choose Israeli implants for installation, which have a less aggressive thread and are made in the shape of a cylinder. Korean root substitutes are also less suitable for restoring anterior teeth, due to possible bone atrophy around the implant and further subsidence of the gums.

The choice of country of manufacture and implant model is best done with an experienced dentist. The doctor will suggest the best options based on the specific characteristics of the clinical situation.

Reviews

Well-known Israeli products appeared in our country relatively recently, but have already gained the trust of both implantologists and patients.

You can discuss the advantages and share your impressions about Adin Dental Implant Systems products by leaving a comment below.

If you find an error, please select a piece of text and press Ctrl+Enter.

Tags Adin implants implantation prosthetics

Did you like the article? stay tuned

Previous article

Protefix cream: in what cases is it effective to use?

Next article

What kind of toothpaste should be used for periodontal disease?

About the manufacturer

The manufacturing company has been known since 1972. The founding city was Nazareth. The company began its development with the production of various dental products, quickly increasing its turnover. The small company has now grown into a large corporation.

Materials used

Adin implants are based on a metal support made of high-strength titanium, widely used in the medical field. Titanium products are characterized by the highest quality, reliability and excellent biocompatibility. The survival of titanium implants into bone tissue occurs within several months.

Adyn dental implants are easy to use. The main advantage of these implants is their reliability and excellent survival rate.

Design features

The range of products is quite wide, and each model has its own special characteristics aimed at solving certain problems. Adin implants differ not only in their shape, but also in the method of connection, as well as the type and size of the thread. The diameter of the platform and the height of the implant vary depending on the required characteristics. Adin brand products are distinguished by the use of innovative technological developments.

Technologies used

Important! Adin Corporation is continuously improving its implantation technologies. Permanent employees include dental implantologists and surgeons, as well as specialists in the field of biological sciences.

The company's activities are certified internationally, regularly passing all relevant commissions and inspections. The production of implants has the appropriate CE and FDA certificates. The company's management level is confirmed by ISO 9001:2000 and ISO 13485:2003. The manufacturer has its own laboratory where manufactured products are tested before sale. The Israeli Department of Health also monitors the quality of Adin implants.

Warranty for Israeli implants and service life

The warranty period provided by manufacturers for dental structures can reach 20 years. This means that the functionality of the implant will be maintained for the specified period.

In addition, if the system is delivered defective or breaks down, the manufacturer undertakes to replace it free of charge.

You should not generalize the warranty obligations of the dentistry where the structure was fixed and the warranty received from the manufacturer. The medical institution does not take responsibility for technical failures; only the manipulations performed by the doctor are covered by the guarantee. If the structure is rejected due to non-compliance with the installation technique, the patient must be reimbursed for all expenses. As a rule, the obligations of a medical institution are reflected in the contract for the provision of services.

Connection types

Attention! One of the main parts of each implant is the connection of the artificial root to the abutment. The variations of this connection often determine the choice of one or another implantation system.

The manufacturer Adin takes this point into account, therefore, in the range of models produced, the range of connection types is very wide, allowing you to choose the best option. The most famous is the hexagon - a connection considered a classic and reliable option. Among the manufactured implants there is a whole line of models with a conical connection. This fixation is of very high quality and ensures maximum immobility of the structure from the very first stage.

Regardless of what type of implants the attending physician selects, the patient can be sure that implantation with products from Israel will be successful, and the prostheses themselves will last for the maximum possible period.

Which implants are better: Korean or Israeli?

The cost of these and Israeli dental implants is almost at the same level. The only difference is that Israel has been on the implantology market for over 40 years, and Korea for no more than 28 years.

It should be noted that in the development of such Israeli systems as Alpha Bio, Noris Medical and AB Dental, materials of unsurpassed quality are used, innovative technological solutions and modern implantation techniques are used. At the same time, a distinctive feature of the products of the above brands is the variety of models presented.

Also, to answer the question: “Israeli or Korean implants - which is better?”, special attention should be paid to the period of their operation. For dental systems from Israel, it reaches several decades; for analogues from Korea, the period of use of implants is significantly reduced.

An undoubted advantage is also the focus on our own technological solutions - unique techniques for drilling the base, surfaces with an improved structure for effective and prompt engraftment.

Another important advantage of Israeli implantation systems is the improved thread shape, which guarantees reliable initial stabilization and the ability to quickly fix a temporary prosthetic device.