8 most popular ceramic braces with before and after photos

November 13, 2020

Many patients who need correction of bite pathologies pay attention to ceramic braces. And it’s not surprising, because these are very aesthetically pleasing devices that look great both in any photos and upon closer inspection in person. Also, those who have already undergone treatment note: the condition of the teeth before and after the correction is a big difference. Due to the demand for orthodontic appliances made of ceramics, we present to your attention an article by the editors of the UltraSmile.ru portal about the most popular models today.

Classification of ceramic devices

First, let's figure out what types of ceramic systems there are today.

According to location in the oral cavity

Ceramic braces are only vestibular, which are attached to the outer (frontal) surface of the teeth. In the arsenal of modern orthodontists there are also lingual appliances that are fixed on the inside of the dentition, that is, on the side of the tongue. However, they are never created from ceramics due to the fragility of the material, and also for the reason that this is simply impractical, because even metal systems, which, by the way, are considered the most functional, on the reverse side of the series will be completely invisible to others.

According to the method of fixing the power arc

The power arc in ceramic devices (the same one that puts pressure on the dentition, causing it to move) can be fixed in different ways. Depending on the method of arch fixation, doctors distinguish two types of structures:

ligature: here special rubber bands, which can be either transparent or colored, act as fasteners. These rubber bands need to be changed approximately once a month. Their tension or loosening in the grooves of the braces allows the doctor to regulate the force of pressure on the teeth,
non-ligating: they are also called self-ligating. This option is considered more compact, aesthetic and functional. Attaching the arch to the plates (more precisely, snapping) is carried out here using special locks located on the braces themselves. Such locks can be ceramic or metal. The good thing about the design is that it allows you to avoid frequent visits to the clinic to correct the position of the power arch, since this process is regulated independently as the teeth are aligned.

The photo shows the difference between ligature and non-ligature systems

Based on materials used in the manufacturing process

Today there are both completely solid ceramic braces and combined ones (with grooves and metal clasps). The first option is very aesthetic and even practically invisible on the teeth, but the second is cheaper and more functional. So, if the design contains metal components, this makes it more durable, allows you to work with a larger number of clinical cases, reduces the level of friction between the elements of the system, which means the treatment process is much faster.

Metal arc with and without coating

Despite the fact that the braces are ceramic, that is, the plates themselves consist of ceramics, the power arc in them, which combines all parts of the system into a single whole, is always metal. This is again done for greater efficiency and increased functionality of the system, reducing the level of friction.

At the request of the patient, such an arc can be coated with white coating, due to which the design looks more advantageous. But if you want exactly this type of orthodontic device, you must understand that the coating is short-lived and can wear off. Moreover, not all at once, but in parts, which will spoil the aesthetics of the smile.

And now it’s time to talk about popular ceramic braces and at the same time look at photos before and after bite correction with these aesthetic systems.

Recommendations from experts

Do not delay starting treatment. The correction process at a young age proceeds much faster than at an older age.
Trust the specialist’s decision; he chooses the method and equipment for the correction course based on the real clinical picture identified during in-depth diagnostics.
Strictly follow the medical instructions of your orthodontist. Only adherence to the intended plan guarantees the success of the process.
Take special care to maintain oral hygiene. Otherwise, with the accumulation of pathogenic microflora in dental plaque, the development of caries and more severe stomas is possible. diseases.

The network of dental clinics “Smile” offers orthodontic occlusion adjustment services using ceramic brace systems. For our patients, we guarantee interest-free installment payments, as well as a family discount. We provide the necessary documentation for processing personal income tax deductions.

Our specialists are highly qualified and have extensive practical experience. Doctors constantly improve their professional level by studying in the largest Russian and European orthodontic centers. Our services meet world standards.

Our branches in Moscow are within walking distance from the metro:

near the station Alekseevskaya (area of VDNH and Mira Avenue), address: st. 3rd Mytishchinskaya 3, building 2;
not far from the station Shelepikha, address: Shelepikhinskaya embankment, 34, building 1.

Your beautiful smile is our job, we will teach you to smile openly!

Models Clarity and Clarity SL from 3M Unitek (USA)

As for the Clarity model, this is a traditional ligature system, where the arch is fixed using rubber bands. But the Clarity SL model is self-ligating ceramic braces (but if indicated and as necessary, you can selectively ligate the arch with elastic bands).

The photo shows the Clarity system

In both samples, the plates themselves have an anatomical contour, a microcrystalline surface and rounded edges. In addition, they are reinforced with an open metal groove (lock) made of stainless steel. All this allows the system to be very durable, ensures the reliability of its fixation on the teeth, makes the process of adaptation and subsequent use comfortable, and makes the treatment as effective as possible for the patient. These design features also reduce the risk of mucosal injury to zero and simplify daily hygiene care.

The manufacturer positions its devices as one of the fastest to install, eliminating time-consuming steps in the orthodontist’s office. The fact is that each plate is already treated with an adhesive composition. In addition, when in contact with the enamel, the adhesive acquires a pink color, which allows the doctor to accurately determine its location and carefully remove excess if necessary.

The photo shows teeth before and after treatment

When choosing these aesthetic models, the cost of correcting the bite on one jaw will cost you approximately 110-120 thousand rubles.

How are they arranged?

Such systems are designed to correct the position of teeth as quickly as possible, without pain and inconvenience , and with minimal aesthetic problems.

Ceramic braces are permanent structures. They consist of the following elements:

clasps – their number is designed to be attached to each tooth, they are attached with special dental glue;
arches are connections between clasps that are tightened for alignment with special devices; most often they are made of a material with memory in order to put an unevenly grown tooth in place.

The clasps are made of ceramic, and the arches are made of metal. Orthodontists can offer a system with a white arch , then such braces are practically invisible on the teeth.

Braces from the Damon line from Ormco (USA)

Orthodontic devices from Ormco are very popular among patients in domestic and foreign clinics. If we consider ceramic models specifically, it just so happens that they all belong to the Damon series, which, by the way, only includes self-ligating systems.

So, samples of ceramic systems in the Daimon line are represented by the following models.

Damon Clear

This is an all-ceramic system that does not contain metal elements, which makes it look very advantageous on the teeth, does not oxidize from interaction with saliva and is suitable for allergy sufferers. The advantage of these devices is that when peeled off, they can be fixed again.

As for the shortcomings, they also exist. Firstly, the designs are not suitable for all clinical cases; for example, they cannot be installed on the lower jaw if there are low-height teeth there. Secondly, treatment with them will last on average 2-3 months longer than with other devices that contain metal components. You will find more complete information about the disadvantages and advantages of this model in the feature article on the website.

The photo shows teeth before and after treatment with Damon Clear braces.

The price is about 100 thousand rubles when installed on one jaw.

Damon Clear2

This is a more advanced all-ceramic model, which, unlike the previous version (Damon Clear), has increased strength and color fastness (does not accumulate dyes from food and drinks, retains its original whiteness), as well as a rough surface for better fixation on the teeth.

Price – from 100 thousand rubles.

Damon 3

Here, ceramic plates are successfully combined with metal clasps to secure the arc. This option is the most budget-friendly of those presented. In addition, this is an excellent compromise between functionality and aesthetics, allowing it to solve a large number of clinical cases and make the treatment process less time-consuming than when using all-ceramic devices.

The photo shows Damon 3 braces

In some situations, this model allows you to avoid tooth extraction to free up additional space in the jaw, which is sometimes required before correcting the bite. If, during operation, one of the plates accidentally comes off, you will have to install a new one, and this is a drawback of this system. But this is one of the most budget aesthetic models in the Daimon line, whose price starts from 90 thousand rubles.

Adaptation

Getting used to braces varies from person to person.

For some, this process is painful and takes a lot of time, while others note that adaptation was quick and unnoticed.

But on average, the process of getting used to ceramic systems is accompanied by pain of varying intensity in the gums and teeth.

Sometimes the pronunciation of words and the process of chewing food suffer. If a person is determined to achieve a beautiful smile as a result of treatment, getting used to it will take a little time and effort.

In-Ovation C system from Dentsply Sirona GAC (America - Germany)

In general, the In-Ovation line includes four models1 of braces: R, C, L, mini. According to the manufacturer, they share common advantages: the absence of ligatures (all of them are self-ligating), ease and speed of installation, reduced treatment time, and ease of hygienic procedures during operation. The devices are very comfortable for the patient, since the plates themselves have an anatomical shape and rounded edges, fit tightly to the teeth, and do not injure the soft tissues of the oral cavity.

The photo shows teeth before and after treatment with the In-Ovation C system

As for the In-Ovation C model, it is the most aesthetically pleasing in the collection, as it is made of ceramic. Together with it, the manufacturer can offer patients highly aesthetic arches with a matte rhodium coating and low reflectivity, due to which the smile will look simply great. Such arcs are not inferior in functionality to standard metal ones.

These systems are not cheap. The price for treating one jaw with them starts from 115 thousand rubles.

Care

During treatment with fixed orthodontic appliances, oral care should be especially careful. Once every few months you need to visit the orthodontist for dental cleaning. At home, the patient should also brush his teeth with special brushes, which the doctor will recommend, clean the interdental spaces with floss and brushes, and it is advisable to additionally use irrigators.

It is forbidden to chew hard objects; seeds, nuts, hard vegetables and fruits cannot be bitten off, they should be cut into small slices.
Chewing gum and gummy candies should also be avoided during treatment. To get a consultation

Blesk bracket systems from Smart (Russia - China)

These are classic ligature systems created from durable, translucent and food stain-resistant nanoceramics. The manufacturer claims that they do not shine even after liquids get on them, that is, they completely merge with the enamel of the teeth, and therefore from a distance they can go unnoticed by others.

The plates have a slightly elongated shape, without sharp corners, and are smoothly polished on the outside. They have microporosity and a zirconium coating on the inside, thanks to which they fit tightly, adhere well to the teeth, and do not scratch the mucous membranes. At the request of the patient, the plates can be equipped with a metal groove or a ceramic one. Smart also offers patients “Chic” arches with tooth-colored coating.

When installing Blesk devices, you should not expect that the treatment will be quick. You will have to visit the orthodontist frequently (every month), and correction of even minor malocclusions can take several years. However, many people choose these ceramic braces for their budget price and high aesthetics.

“I’ve wanted to straighten my teeth for a long time. I looked at different types of devices for a long time, but in the end I decided to get “Shine” ceramic braces. I looked so many photos on the Internet before and after treatment with different systems, but I still didn’t understand what the differences were. Products from different manufacturers look approximately the same, and the results are also similar. But the price of Blesk is significantly lower when compared with ceramic models from other manufacturers - this was the determining factor for me!”

Krainova L., review from the dental portal gidpozubam.ru

This is what Blesk braces look like

The price for bite correction with this model starts from 70 thousand rubles.

Wearing ligature and non-ligature braces: what is the difference?

Both types of structures effectively perform their task - correct the pathology of teeth closure, return teeth to the anatomically correct position. But for the patient, the process of wearing them will be different.

Non-ligature designs look neater, “lighter”, more inconspicuous: they have no additional elements, and the clasps themselves are smaller.
Caring for self-ligating systems is much easier: metal and rubber ligatures often contain food fragments and need to be cleaned more thoroughly and for longer.
The main difference we have already mentioned is the frequency of correction. When wearing classic ligature braces, you need to visit the orthodontist every three to four weeks, and when wearing non-ligature braces - every six to eight weeks. For many patients, this is a decisive moment when choosing an orthodontic system.

Photos of treatment stages on self-ligating braces

Reflections from Ortho Technology (USA)

This ligature model is made of pure translucent polycrystalline aluminum oxide. Among the main advantages, the manufacturer highlights the following: excellent appearance, increased strength, reliable fixation and absence of complications during removal, resistance to chips and breakages, impermeability to dyes.

The photo shows teeth before and after treatment with Reflections braces.

Cost – from 85 thousand rubles for installation on one jaw.

White arcs

Many patients are concerned about the fact that even when using white braces, a metal arch can ruin the whole picture. Today, arcs are made from various alloys:

Alloy of titanium and nickel (Nitinol);
Alloy of titanium, nickel and copper;
Alloy of molybdenum with titanium;
Titanium alloy with niobile;
Stainless steel.

Nitinol archwires are the most popular today. They are very flexible and easy to install. To improve aesthetics, the arc is provided with a light coating. Most often it has a white or beige tint. The doctor will select an archwire of a suitable color, taking into account the shade of the teeth. The coating is quite durable and smooth.

Empower Clear from American Orthodontics (USA)

These are carefully designed self-ligating devices, designed using CAD modeling, which, according to the manufacturer, provides them with increased mechanical strength2. Each bracket plate has a rounded contour, and this minimizes injuries to the mucous membranes of the lips and cheeks. Empower Clear retains its original aesthetics and clarity throughout its entire lifespan.

Photo shows Empower Clear braces

The cost of this system differs slightly from those we presented earlier and is about 95 thousand rubles.

Diet features

You also need to reconsider your view of nutrition. You will have to adhere to a strict diet throughout the entire treatment period with ceramic braces:

It is necessary to exclude hard and crunchy foods - crackers, chips, popcorn, nuts and seeds, as well as hard candies, such as caramel or grilled cake. These products may change the shape of the arc or even cause it to break.
Sticky and viscous foods are prohibited - cheeses, fresh baked goods, cookies, breakfast cereals, nougat, toffees and others. Of course, chewing gum should be excluded.
You should be careful with food and drinks that can change the color of the clasps and silicone ligatures. Among them are red wine, black tea and coffee, fruit and vegetable juices, tomatoes, dark berries, chocolate, beets, curry. It is also advisable to limit smoking.
You should not alternate too hot and cold food; food should be at medium temperature. Frozen berries are strictly prohibited. This contrast can cause the glue that holds the locks to break down.

The basis of the menu can be cream soups, cutlets and meatballs from well-chopped minced meat or fish, mashed potatoes, various cereals, vegetable caviar, milkshakes, smoothies, bananas, watermelons, melons.

QuickClear and TruKlear from FORESTADENT (Germany)

TruKlear are elegant self-ligating all-ceramic systems, where the plates themselves and the clasps under the arc are made of hypoallergenic and aesthetic material.

This is what QuickClear systems look like

QuickClear are also ceramic and self-ligating, but they have a metal clip, which expands the capabilities of the devices in relation to different clinical cases and reduces the treatment time. By the way, to improve the aesthetics of a smile, the manufacturer carefully polished the metal component of the system and made it matte, and the plates themselves are flat in shape.

How much does bite correction with these systems cost? To straighten teeth on one jaw you will have to pay about 85-90 thousand rubles.

This is what teeth look like before and after treatment

FORESTADENT Corporation also offers patients another model of ceramic braces – GLAM. They are classified as ligatures. Completely matte, they perfectly adapt to the shade of any teeth, and therefore are completely inconspicuous to others. Included with them, the manufacturer offers a BioCosmetic archwire with a tooth-colored coating, as well as transparent elastics.

Contraindications

Contraindications to installing ceramic braces are the same as for other systems:

caries and gum disease - first you need to undergo treatment,
exacerbation of chronic diseases,
allergies to the materials used,
numerous fillings and crowns,
Bruxism is teeth grinding during sleep.

Caution should be exercised when installing braces during pregnancy, as well as for people who engage in extreme and contact sports (boxing, karate, etc.).

Experience ceramic from TOMY Inc (Japan)

Since 2012, the official distributor of orthodontic products manufactured by the Japanese company TOMY Inc is the German corporation GC Orthodontics.

The photo shows Experience ceramic braces

What are Experience systems? A whole line of products is produced under this name, but here we will only talk about the aesthetic ceramic models Experience ceramic and Experience ceramic mini. Both bracket systems operate on the principle of self-ligation, that is, the power arc is snapped into them using special locks. At the same time, the clips of the clasps are coated with a thin layer of rhodium, which allows them to completely merge with the body of the bracket and improves the aesthetics of these devices.

Read the article on the topic: TOP 20 dentists where you can correct your bite.

Braces marked mini are compact and provide increased comfort for the patient. They are very durable and impact resistant, just like the Experience ceramic model.

The cost of bite correction with these devices is about 85 thousand rubles per jaw.

Notice

: Undefined variable: post_id in
/home/c/ch75405/public_html/wp-content/themes/UltraSmile/single-item.php
on line
45 Notice
: Undefined variable: full in
/home/c/ch75405/public_html/wp-content /themes/UltraSmile/single-item.php
on line
46

Rate this article:

( 2 ratings, average: 5.00 out of 5)

braces

According to the official website of the manufacturer in Russia: dentsplysirona.com/ru
According to the manufacturer's official website: americanortho.com

Expert “Today, orthodontists have a large number of models of ceramic braces from different manufacturers. They all look decent, but the choice should depend not only on individual preferences and financial capabilities, but also on the clinical situation. For example, not all ceramic models are suitable for correcting complex malocclusions. Therefore, it is better to first undergo a thorough diagnosis in order to understand what you are dealing with, and then consider different options.” Orthodontist Vagapov Zakir Irkinovich

Consulting specialist

Chorny Stanislav Vladimirovich

Doctor rating: 9.8 out of 10 (4) Specialization: Orthopedist Experience: 20 years

How long does treatment last?

The duration of occlusion correction depends on several factors:

complexity of the clinical case - for small defects, several months are enough, for serious ones - up to 3 years;
the age of the patient - in children and adolescents the process of tooth movement is faster than in adults;
brace system material – bite correction occurs more intensively when using a metal system.

Important: the approximate duration of the course of therapy can be announced by an orthodontist only after conducting a diagnosis, choosing a brace system and drawing up a treatment plan.

Comments

Braces are all great. But I have no desire to wear them, even ceramics... What other options are possible?

Nikita (11/25/2020 at 03:56 pm) Reply to comment

Editorial staff of the portal UltraSmile.ru (11/28/2020 at 09:12) Reply to comment

Are ceramic braces suitable for a child?

Svetlana (01.12.2020 at 15:02) Reply to comment

Editorial staff of the portal UltraSmile.ru (04.12.2020 at 09:14) Reply to comment

I like Japanese braces in terms of quality and appearance better than others, but they are selected individually. Tell me, can braces be placed successfully at any age or are there restrictions?

Anna (12/18/2020 at 09:40) Reply to comment

How many times can you get braces in your lifetime? And can they be placed on ceramic crowns? I wore braces for 2 years, after removing them everything came back. I want to install it again, but I’m afraid that the crowns will be damaged when removed.

Anna (12/18/2020 at 10:23 am) Reply to comment

Braces look attractive, straighten teeth well, and change your smile. There is a choice and that's the main thing. Tell me, do specialists usually offer systems from different countries or just one or two?

Dan (12/18/2020 at 10:41 am) Reply to comment

You need to carefully weigh the pros and cons before installing braces. How much do braces feel and are they comfortable to live with? After all, they require careful care and periodic visits to the doctor.

Tonya (12/18/2020 at 10:45 am) Reply to comment

As I understand it, the most comfortable and well-thought-out model for treatment is installed and selected exclusively by a specialist? You probably won’t be able to choose a model that you like externally.

Vera (12/18/2020 at 10:47 am) Reply to comment

My front tooth was half broken at one time. It has been built up and is held on by a pin. Is it possible to install braces on such a tooth?

Anastasia (12/18/2020 at 10:47 am) Reply to comment

How should you properly care for braces? Is there a uniform approach to this or does it all depend on what they are made of? Because one doctor recommends one thing, and another another. And there is no clarity.

Ekaterina (02/05/2021 at 09:58) Reply to comment

As a child, I never understood the people who agreed to them, but now I understand that although it is expensive and not easy, the result is worth it, straight, beautiful teeth. And if a person is already over 30, can this also be installed?

Lera (02/05/2021 at 10:06 am) Reply to comment

Each model has its own characteristics and capabilities. Tell me, can a brace help if I have problems with the temporomandibular joint due to which I have an incorrect bite?

Alla (02/05/2021 at 15:57) Reply to comment

Write your comment Cancel reply

What kind of design is this?

This is a modern device that straightens teeth and allows a person to feel confident due to the fact that they are practically invisible against the background of the enamel.

These systems are matte and their color can be matched to the shade of a person's enamel. Modern orthodontics is developing newer and more elegant designs that reduce metal and minimize external aesthetic inconveniences.

In terms of efficiency, they are not inferior to, and even superior to, conventional braces systems.

Insignia technology

Insignia technology is a CAD/CAM system for manufacturing arches and brackets using digital impressions of the patient’s teeth.

The doctor scans the teeth with an intraoral scanner or using a plaster model scanner.
Sends a digital impression and diagnostic data about the patient to the American laboratory Insignia.
Receives braces from the USA with computer-calculated torque and arch values with applied bends.

The program shows how to secure the braces and achieve the patient's dental alignment approved by the doctor after treatment is completed.

Advances in digital dentistry are speeding up diagnosis and increasing accuracy. The patient spends less time in the orthodontist's chair, and the duration of treatment is reduced by 37%.