In modern dentistry, many different methods are used to restore the dentition in case of partial or complete loss of its units. The choice of technology depends, in particular, on the timing of dental prosthetics. The difference in the duration of treatment can be up to several months, depending on how soon and how high-quality the patient wants to get.
Timing of prosthetics on implants
If the patient chose implantation to restore teeth, the final stage may occur in six months or longer. This is due to the fact that before the installation of prostheses you have to undergo several procedures and operations. In particular, when using the classical technique, before obtaining the final result it is necessary:
- insert artificial roots into the jaw - implants;
- wait until the rods are overgrown with bone tissue and stabilized;
- undergo the second surgical stage of implantation to install the former;
- after two weeks, install the abutment and take impressions to make the crown;
- do a fitting and, if necessary, correction of the prosthesis.
After all these manipulations, the time comes to install a permanent artificial tooth. The general time frame for prosthetics, including implantation, in this case can range from four to seven months.
Maintenance of installed structures
Patients should remember that caring for artificial teeth is no different from caring for natural teeth. It is very important to brush your teeth daily with toothpaste and a brush, and remove food debris after each meal. With removable dentures, this is a mandatory condition, since food debris between the artificial structures and the gums can cause inflammation.
Read more about caring for installed dentures in the material “How to properly care for removable and fixed dentures so that they last as long as possible.”
In addition, you should not eat too hard foods - nuts, seeds, crackers. Artificial teeth can easily break from excessive pressure.
Prosthetics in complex cases
The duration of treatment, or rather the timing of prosthetics, may increase even more if additional surgical procedures are necessary. For example, to install a crown or bridge on implants, bone tissue augmentation may be necessary, since its volume is not enough for the full “implantation” of a titanium root. In some clinical situations, it is also necessary to perform gum grafting, which requires additional time.
It is sometimes possible to install a prosthesis in such difficult conditions only after a year. This is due to the fact that you first have to wait until the bone material takes root. Then install the implant and allocate time for osseointegration (overgrowth of the rod with bone tissue). And only then will the production of the prosthetic structure begin. It is impossible to speed up treatment in such situations due to certain biological “laws” that no dentist can change. The fusion of bone tissue particles requires a certain time and this must be accepted and taken into account.
The beauty of your smile is in our hands
This Personal Data Privacy Policy (hereinafter referred to as the Privacy Policy) applies to all information that the site located on the Internet at the address (on the domain name): https://www.clinicperfect.ru/ (hereinafter referred to as the Site) can receive about the User during the latter’s use of the Site and its services. 1. Terms and definitions used in the Privacy Policy
In the Privacy Policy, unless otherwise expressly stated in the text, the following words and expressions have the following meanings:
1.1. A website is a set of computer software and hardware that ensures the publication for public viewing of information and data, united for a common purpose, through technical means used for communication between computers on the Internet, operating through an Internet resource and related services. The Site in this Agreement means the Site on which a unified system for registration and authorization of users is located, located on the Internet at the address (domain name): https://www.clinicperfect.ru/
1.2. Site Administrator - persons authorized by the owner of the Site to manage the Site, acting on behalf of Digital Dentistry Clinic "Perfect" LLC
The owner of the Site is the limited liability company Digital Dentistry Clinic “Perfect” LLC Address: 214019 Smolensk region, Smolensk Tramway proezd, 4, office No. 14
1.3. User - a person using the Internet and, in particular, the Site, who has completed the registration procedure on the Site in order to access online ordering of services presented on the Site and has his own personal page (profile/account), as well as a person using the Site without completing the registration procedure for informational and similar purposes.
1.4. Personal data - any information relating to a directly or indirectly identified or identifiable individual (subject of personal data).
1.5. Processing of personal data - any action (operation) or set of actions (operations) performed using automation tools or without the use of such tools with personal data, including collection, recording, systematization, accumulation, storage, clarification (updating, changing), extraction, use, transfer (distribution, provision, access), depersonalization, blocking, deletion, destruction of personal data.
1.6. Confidentiality of personal data is a requirement for the Site Owner and (or) Site Administrator or other person who has access to personal data to comply with the requirement not to allow their distribution without the consent of the subject of personal data or the presence of another legal basis.
1.7. Cookies are a small piece of data sent by a web server and stored on the User’s computer, which a web client or web browser sends to the web server every time in an HTTP request when trying to open a page of the corresponding site.
1.8. IP address is a unique network address of a node in a computer network built using the IP protocol.
2. GENERAL PROVISIONS
2.1. The User's use of the Site constitutes agreement with this Privacy Policy and the terms of processing of the User's personal data.
2.2. In case of disagreement with the terms of the Privacy Policy, the User must stop using the Site.
2.3. This Privacy Policy applies only to the Site named in clause 1.1. of this Privacy Policy, located at the address (on the domain name): https://www.clinicperfect.ru/. The Site Administrator and the Site owner do not control and are not responsible for third party sites that the User can access via links available on the Site.
2.4. The Site Administrator and the Site Owner do not verify the accuracy of the personal data provided by the Site User.
3. SCOPE OF THE PRIVACY POLICY
3.1. This Privacy Policy establishes the obligations of the Site Owner and the Site Administrator to non-disclose and ensure a regime for protecting the confidentiality of personal data that the User provides at the request of the Site when registering on the Site.
3.2. Personal data permitted for processing under this Privacy Policy is provided by the User by filling out the registration form on the Site in the “Registration” section and includes the following information:
3.2.1. Last name, first name, patronymic of the User;
3.2.2. User's contact phone number;
3.2.3. Email address (e-mail);
3.2.4. Place of residence of the User (if necessary).
3.3. The site protects data that is automatically transmitted during viewing of advertising blocks and when visiting pages on which the system’s statistical script (“pixel”) is installed:
— IP address; — information from cookies;
— information about the browser (or other program that provides access to display advertising);
— access time; — address of the page on which the advertising unit is located;
— referrer (address of the previous page);
— geolocation.
3.4. Disabling cookies may result in the inability to access parts of the Site that require authorization.
3.5. The site collects statistics about the IP addresses of its Users. This information is used to identify and solve technical problems and to monitor the legality of financial payments.
3.6. Any other personal information not specified above (browsers and operating systems used, etc.) is subject to secure storage and non-distribution, except for the cases provided for in clauses 5.2. and 5.3. of this Privacy Policy.
4. PURPOSES OF COLLECTING USER’S PERSONAL INFORMATION
4.1. The Site Administrator and the Site Owner may use the User’s personal data for the purposes of:
4.1.1. Identification of the User registered on the Site for placing an order and (or) concluding an Agreement for the sale and purchase of goods remotely.
4.1.2. Providing the User with access to personalized resources of the Site.
4.1.3. Establishing feedback with the User, including sending notifications, including electronic ones, requests regarding the use of the Site, provision of services, processing requests and applications from the User.
4.1.4. Determining the location of the User to ensure security and prevent fraud.
4.1.5. Confirmation of the accuracy and completeness of personal data provided by the User.
4.1.6. Creating an account for making purchases, if the User has agreed to create an account.
4.1.7. Notifications to the Site User about the status of the order.
4.1.8. Processing and receiving payments, confirming taxes or tax benefits, disputing a payment.
4.1.9. Providing the User with effective customer and technical support if problems arise related to the use of the Site.
4.1.10. Providing the User with his consent, product updates, special offers, pricing information, newsletters and other information on behalf of the Site or on behalf of affiliates of the Site Owner.
4.1.11. Carrying out advertising activities with the consent of the User.
4.1.12. Providing the User with access to sites or services of affiliates of the Site Owner in order to receive products, updates and services.
5. METHODS AND TERMS OF PROCESSING PERSONAL INFORMATION
5.1. The processing of the User's personal data is carried out without a time limit, in any legal way, including in personal data information systems using automation tools or without the use of such tools.
5.2. The User agrees that the Site Administrator and the Site Owner have the right to transfer personal data to third parties, in particular, courier services, postal organizations, telecommunication operators, solely for the purpose of fulfilling the User’s order placed on the Site, including delivery of goods.
5.3. The User's personal data may be transferred to authorized government bodies of the Russian Federation only on the grounds and in the manner established by the legislation of the Russian Federation.
5.4. In case of loss or disclosure of personal data, the Site Administrator or the Site Owner informs the User about the loss or disclosure of personal data.
5.5. The Site Administrator or the Site Owner takes the necessary organizational and technical measures to protect the User’s personal information from unauthorized or accidental access, destruction, modification, blocking, copying, distribution, as well as from other unlawful actions of third parties.
5.6. The Site Administrator or the Site Owner, together with the User, takes all necessary measures to prevent losses or other negative consequences caused by the loss or disclosure of the User’s personal data.
6. OBLIGATIONS OF THE PARTIES
6.1. The user is obliged:
6.1.1. Provide information about personal data necessary to use the Site.
6.1.2. Update, supplement the provided information about personal data if this information changes.
6.2. The Site Administrator or Site Owner is obliged to:
6.2.1. Use the information received solely for the purposes specified in clause 4 of this Privacy Policy.
6.2.2. Ensure that confidential information is kept secret, not disclosed without the prior written permission of the User, and also not sell, exchange, publish, or disclose in other possible ways the transferred personal data of the User, except for the cases provided for in clauses 5.2. and 5.3. of this Privacy Policy.
6.2.3. Take precautions to protect the confidentiality of the User's personal data in accordance with the procedure usually used to protect this type of information in existing business transactions.
6.2.4. Block personal data relating to the relevant User from the moment of application or request from the User or his legal representative or the authorized body for the protection of the rights of personal data subjects for the period of verification, in the event of detection of unreliable personal data or unlawful actions.
7. RESPONSIBILITY OF THE PARTIES
7.1. The Site Administrator or the Site Owner of the site, who have not fulfilled their obligations, are liable for losses incurred by the User in connection with the unlawful use of personal data, in accordance with the legislation of the Russian Federation, except for the cases provided for in clauses 5.2., 5.3. and 7.2. of this Privacy Policy.
7.2. In case of loss or disclosure of confidential information, the Site Administrator or the Site Owner shall not be liable if this confidential information:
7.2.1. Became public domain until it was lost or disclosed.
7.2.2. Was received from a third party prior to its receipt by the Site Administrator or Site Owner.
7.2.3. Was disclosed with the consent of the User.
8. DISPUTE RESOLUTION
8.1. Before going to court with a claim on disputes arising from the relationship between the Site User and the Site Administrator or the Site Owner, it is mandatory to submit a claim (a written proposal for a voluntary settlement of the dispute).
8.2. The recipient of the claim, within 30 calendar days from the date of receipt of the claim, notifies the claimant in writing about the results of consideration of the claim.
8.3. If an agreement is not reached, the dispute will be referred to a judicial authority in accordance with the current legislation of the Russian Federation.
8.4. The current legislation of the Russian Federation applies to this Privacy Policy and the relationship between the User and the Site Administrator or the Site Owner.
9. ADDITIONAL TERMS
9.1. The Site Administrator or the Site Owner has the right to make changes to this Privacy Policy without the consent of the User.
9.2. The new Privacy Policy comes into force from the moment it is posted on the Site, unless otherwise provided by the new edition of the Privacy Policy.
Time frames for manufacturing and installation of prostheses based on natural teeth
The choice of simpler prosthetic methods is usually explained by the desire to reduce the cost of treatment, as well as install crowns or bridges as quickly as possible. In this case, new teeth can be obtained in just a few days or a couple of weeks. This is exactly what is required to:
- treat, depulpate and prepare supporting units;
- take impressions, on the basis of which a crown or bridge will be made in the laboratory;
- try on and adjust the new design;
- install the prosthesis on the stump of the abutment tooth.
Modern progressive methods make it possible to restore a damaged tooth in one day. We are talking about using computer technology to design and manufacture a prosthesis in just a few hours, right in the dentist’s office. Such a crown is machined with high precision in a special milling machine, after which it undergoes finishing processing and is installed on the abutment tooth.
Repair of dentures
They try to make dentures durable and wear-resistant. Such that they can withstand prolonged mechanical stress and not break. Despite this, sometimes even the best quality prostheses break. The worst thing is when their base cracks.
The causes of breakdowns can be very diverse:
- Poor quality. The most common reason. The design may break because it was made incorrectly, from low-quality materials or without meeting technological requirements.
- Loose fit to the gum. If the denture does not fit well to the gum, this leads to its loosening, which can also cause breakage.
- Loss of an abutment tooth A denture may become unusable if the abutment tooth that supported the structure falls out. The dental unit may develop defects or cracks.
- Incorrect use of the prosthesis. In addition to manufacturing errors, the cause of failure can be the incorrect use of this installation. It may be subject to too much stress or mechanical stress.
- Lack of proper care. The oral cavity after prosthetics requires careful care. Neglecting basic hygiene rules can lead to the structure becoming unusable.
In addition, the service life of the prosthesis may simply end. After a certain period has expired, another should be done.
Breakage very often leads to the fact that the prosthesis can no longer be used. But there are also cases when you can limit yourself to repairs. A minor breakdown in a metal-ceramic installation can be fixed in one day.
To repair and solve the problem, you should seek help from a dental technician. He is the one who knows how to fix this or that structure. For repairs, he uses special substances and resins that can glue the damaged prosthesis and it will be like new. If a tooth falls off from the nylon structure, the technician can make a new one and restore the integrity of the denture.
Repairs begin with cleaning. First, the entire structure must be cleaned of dirt. Next comes the damage assessment. If they are not serious, you can use glue; more complex cases require more thorough repairs. If the denture has changed color, it can be easily corrected and soon your smile will shine again.
Some people believe that they can do the repairs themselves, but without proper education and materials, you can ruin the prosthesis and even harm your health. The work of repairing damaged structures should be left to a specialist. After all, he uses a special glue that does not harm the body, and you cannot use it at home.
If the denture is not repaired correctly, parts may break off. This could cause serious injury. Therefore, it is better to entrust repairs to a professional.
Terms of removable prosthetics
The manufacture of removable structures also requires some time. First, the dentist takes impressions of the jaws and sends them to the laboratory. Then it takes two to three days to make the models, after which the first fitting is carried out. About three to five more working days are required to produce the future prosthesis. After trying it on and fitting it takes about a week. The patient then tries on the design again and, if necessary, adjustments are made again. Thus, the production of removable orthopedic structures takes an average of three weeks.
Taking impressions and casts of jaws
In order for a technician to make a denture, he needs an accurate model of the patient’s jaw. Copying of jaws and teeth is done by taking impressions.
During the first visit, the doctor introduces an impression mass into the patient’s mouth on a special spoon. The patient closes his jaws and waits 2-3 minutes for the impression mass to harden. Then the patient opens his jaws and the doctor takes out an exact imprint of the patient’s jaw and teeth.
For patients, the first visit is absolutely not tiring and usually takes about 30 minutes.
Cost of removable dentures in Moscow
As dental practice demonstrates, removable dentures in Moscow are the most inexpensive. Also, removable dentures are officially included in the national compulsory health insurance program, and as a result, installing a removable denture is not at all expensive.
What affects the final cost of a removable denture?
- Type of base material chosen for a removable denture - after studying the price lists, you will be convinced that nylon options have a higher price than acrylic ones;
- The format for obtaining a plaster model of the jaw is in an occluder (a device that fixes the location of the model in central occlusion) or an articulator (a device that imitates the mechanism of operation of the mandibular joint). Models made using an articulator are slightly more expensive.
- Quality and quantity of dental art (teeth made of metal-ceramics, plastic, etc. are available to choose from).
- The level of qualification of the attending dentist who plans prosthetics and installs a removable denture;
- Level and authority of the dental clinic;
- Possible discounts, bonus programs for removable dentures. For regular clients, the clinic can make promotional offers on removable dentures.
The approximate price for removable acrylic dentures in Moscow is from ten thousand rubles.
The estimated cost of a removable denture in Moscow (nylon) is from twenty-two thousand rubles.
Dentistry "Zuub" specializes in dental prosthetics. We offer you inexpensive and high-quality removable dentures of all types (“butterflies”, complete, as well as single and partial).
Which removable dentures are best?
Each of the dentures has its own competitive features, advantages and nuances:
- It is believed that nylon removable dentures are more comfortable for patients to wear, they are soft, bend well, and do not provoke allergies and irritation;
- if dropped on a hard surface, the base of nylon removable dentures will not be damaged, but acrylic analogues risk cracking;
- Also, acrylic dentures are much more durable, they are better fixed to the mucous membrane of the human oral cavity.
Each person may have personal characteristics in adapting the prosthesis. Thus, at the stage of planning prosthetics, a person does not yet know whether he will be satisfied with the aesthetics and quality of chewing food with the help of an installed removable denture. The listed factors are individual - everything comes in comparison and after some time, until the final adaptation to the removable denture occurs.
Of course, removable dentures are not as comfortable as dental implants and permanent bridges, but the latter two options are much more expensive. For older people, removable dentures are a reasonable and affordable solution to the problem of completely missing teeth.
