Advantages and disadvantages of sapphire bracket systems

It's never too late to make your smile beautiful and attractive. For this purpose, modern dentistry uses various orthodontic structures that can correct malocclusion and straighten teeth. Most people associate straight teeth with a beautiful smile, but it is worth remembering that uneven teeth are more difficult to care for, which may require many more visits to the dentist: for the treatment of caries, and maybe for removal, and then for prosthetics.

The most common designs for correcting malocclusion are braces. The most popular recently are the so-called sapphire braces. Their popularity is due to their aesthetic appearance and efficiency. This non-removable device has a streamlined shape without sharp corners, so the process of getting used to them, in comparison with traditional ones, is minimized. However, it is worth keeping in mind that such braces are only suitable for snow-white teeth. If the enamel has a yellowish tint, sapphire braces will be very noticeable.

What is this system?

This name is given to bracket systems, the base of which is made of artificially grown sapphire crystals. At its core, the material is monocrystalline aluminum oxide.

Despite the “artificial” nature, this material does not cause allergies and is completely safe for the human body . It can be classified as ceramics. The difference between sapphire and ceramic braces is that polycrystalline aluminum oxide is used to produce the latter.

For crystallization (“crystal growing”), the starting material is exposed to very high temperatures – 2050°C. After special cutting and polishing, braces have the ability to transmit light . This is what makes them transparent and invisible after installation.

During the cutting process, each element is given a rounded shape, which allows the patient to practically not feel the foreign structure in the mouth, since it does not damage the mucous membrane .

Orthodontic wax and irrigator: additional elements of the standard set

The use of orthodontic wax can significantly reduce the discomfort caused by metal braces.
Very often, protruding elements of the braces system scratch the delicate tissues of the oral cavity. Wax protects gums, inner lips and cheeks from sores and scratches. The wax is sold in small plastic boxes and has a structure similar to soft chewing gum. Using the product is quite simple: you need to tear off a little wax from the container, warm it in your palms, and then apply directly to the lock or bracket that is causing irritation. Don't worry that some of the wax will be accidentally swallowed, because dental products are non-toxic. Another optional, but very useful device designed to make caring for braces easier is an irrigator. This dental device is used to clean the spaces between braces and teeth. The irrigator acts as a small pump that directs a stream of water to the desired location.

Device and principle of operation

Not only the device, but also the principle of operation of such systems are identical to classic braces made from other materials.

The system consists of three main elements:

1. The first is the braces themselves. They are miniature locks that have wings and a groove for the arc.
2. The arc is the main active component. After its installation (passed into the groove of each lock), the braces are connected into a single system.
3. Ligatures are small fasteners that help hold the archwire in the groove.

The principle of operation is based on the fact that the teeth in the jaw are fixed in such a way that they can slightly change their position. Moreover, the change is possible in any direction - towards neighboring teeth or around the central axis - if constant and prolonged slight pressure is applied to the tooth.

The arc is made of a material that has so-called shape memory - it tends to take its original position . It is she who produces this pressure, gradually changing the position of each desired tooth.

Kinds

• Ligatures . Attached to braces using a special arch. They are glued with special dental glue. They wear out quickly and need to be replaced regularly. Made from steel, aluminum and silver. Used in the initial stages of treatment. Correct the bite and ensure correct positioning.
• Unligated . They are the most popular and are independently regulated. Braces are installed quite simply. They consist of clasps attached to the teeth. They are fastened together with a metal arc. Provide painless tooth movement. They have smoothed edges and do not cause discomfort.

Main disadvantages

These orthodontic devices have very few disadvantages compared to other types of braces.

Minuses:

1. The first and most significant of them is high cost. To a greater extent, the complexity of production and processing of each bracket and the need to use expensive equipment play a role here.
2. A fairly long period of bite correction with the help of these systems.
3. Despite the high strength of the base material, it is very fragile, forcing patients to treat the installed device very carefully.
4. They are practically not used to correct serious malocclusions.

Duration of use

The duration of treatment is determined for each patient individually. No specialist will initially be able to say how many months you may need to walk with them. The treatment period is longer, how long they need to be worn, depends on the pathology, the age of the client, individual nuances of the structure of bone tissue, etc.

If the disorders are not complex, the treatment period can be within 8-10 months. Otherwise, correction may need to be carried out over several years. For example, a wide interdental gap can be reduced in about 6 months. Protruding fangs are leveled in 6-8 months, the bite is corrected in 1-2 years.

Orthodontic treatment with any type of braces requires patience and endurance. When used, average pressure is applied to the teeth, so they move no faster than one millimeter per month.

Manufacturers

These orthodontic appliances are made by different manufacturers.

Inspire ICE from Ormco

They take into account all the shortcomings of previous generations, so Inspire ICE are deservedly popular.

photo: before and after treatment

The special platform of each bracket has a special coating of microscopic zirconium balls , which, when applied with an adhesive, create maximum adhesion force to the tooth. At the same time, the properties of the coating make it easy to remove braces after treatment.

Damon Clear

This is a self-ligating passive system that has several advantages. In particular, this concerns the design. First of all, we should note the diamond shape and rounded edges, which increase wearing comfort. Using this system, there is no need for frequent visits to the dentist to activate the archwire.

photo: before and after

The groove is closed using a special patented Spin Tek mechanism, which allows the necessary manipulations (replacement of the arc) to be carried out quickly and without causing discomfort to the patient.

When opening the lock there is no pressure on the tooth. The attachment to the enamel surface is very strong and reliable , thanks to laser etching of the bracket base.

Miso

Also a non-ligature system, the difference of which is the free fixation of the arch without blocking it. This is achieved thanks to the presence of special sliding clamps in the design, which are similar in appearance to a valve.

This type of fixation simplifies the correction and allows you not to visit the orthodontist too often, and also facilitates care.

Radiance from American Orthodontics

The main advantage of this classic ligature system is the special base of each bracket, which has a patented name “Quad-Matte”.

Its peculiarity is that along the perimeter the attachment to the enamel is much weaker than in the central part. This ensures the safety of the enamel and ease of removal without damaging the teeth or using special tools.

Pure by OrthoTechnology

They are distinguished by their neat shape, miniature size and fastening strength , which is ensured by applying powdered zirconium dioxide to the base of each element.

photo: treatment result

The installed system looks like a decoration, as it transmits not only natural daylight, but also neon. Because of this feature, it is suitable for active young people.

Methods for fixing braces

A direct and indirect method for fixing ligature and non-ligature models in the oral cavity has been developed. The direct method involves installing and positioning each element manually.

The indirect method requires less time during the appointment. The main work is carried out on plaster models of jaws (casts). Stages of the indirect fixation method:

1. The orthodontist takes an impression of the jaw;
2. makes a plaster model of the jaw;
3. positions the braces manually on the model and transfers them to the mouth guard;
4. when the patient comes for an appointment, the doctor applies adhesive to the braces in the tray;
5. The orthodontist puts on a mouthguard, all elements are fixed on the teeth at once;
6. The mouthguard is removed, excess adhesive is removed, and if necessary, the position of the braces is additionally adjusted in a targeted manner.

indirect fixation of self-ligating Damon Q braces

The indirect method is more comfortable for the patient and the doctor. The approach is especially relevant for people who cannot or do not want to spend a lot of time in the dental chair.

Working with ligature structures takes more time. In addition to positioning and installing the system elements, it is necessary to fix the arch with ligatures. This means that the doctor must manually install a ligature on each of the 20 braces.

Reviews from orthodontists about the Damon self-ligating bracket system

Practicing orthodontist and experienced teacher Tikhonov A.V. in the book “Control of tooth inclination when using the Damon passive self-ligating system” indicates that torque losses during treatment with self-ligating braces are reduced due to the conscious choice of torque for each specific tooth. A large selection of torque options for Dimon braces, combined with the highly qualified orthodontist, provides reliable control over bite correction.

treatment on Damon

According to Dr. Tagawa D., Damon bite correction reduces the number of doctor visits by almost 50% compared to the number of visits for patients with ligature structures. The treatment period is reduced by an average of 7.2 months. The use of ligature-free models increases the profitability of the clinic due to fewer visits and shorter treatment times.

Orthodontist Jeffrey Jr.
Eberting from Temple University, USA, conducted a comparative study of the timing, results and patient satisfaction of using the Damon self-ligating system and conventional braces. The results of the analysis of jaw models after completion of treatment were better in individuals of both sexes who received Dimon. Most patients rated the duration of treatment as shorter than expected. The material is for informational purposes only and is presented for informational purposes. It does not replace consultation with an orthodontist and is not a guide to correcting dental anomalies.

Ligature and non-ligature

Sapphire braces can be made in two types.

The classic case is when the system is equipped with ligatures to hold the arc - fastenings that are small elastic bands or thin wire rings. Rubber ligatures wear out quite quickly , so they have to be changed by your doctor.

Non-ligating braces are also called self-ligating braces. They are radically different from ligature ones in their structure. Each bracket is equipped with a lock that snaps into place and firmly secures the archwire , allowing it to slide. In this case, no additional fastenings are required, and the friction force will be much less.

Self-ligating systems are more expensive and in many cases more effective, as well as easier to use - there is no need to change the ligatures if they change color, become deformed or break.

However, they are not always better. The fact is that during the treatment process it may be necessary not only to replace the arc , but also the density of its fastening. When the contact with the walls of the groove is loose, this is a passive type of fastening, and if the arc is fastened very tightly, this is an active type.

Sometimes you need to change the force on your teeth. In the case of a classic ligature system, this is quite simple - the doctor can slightly loosen the fastenings , allowing the arc to slide freely or vice versa.

But self-ligating systems can be equipped with only one (passive or active) type of fixation. This may affect the duration of treatment, prolonging it.

Price

The price of sapphire braces in Moscow depends on various factors. On average, their cost varies from 25,000 rubles and above. If all braces are made of sapphire, then their cost increases significantly. If sapphires are installed only in visible areas, and ceramics or metal are used on distant teeth, this significantly reduces the cost of the structure. Before choosing sapphire braces, study information about them on the Internet, read people's reviews and compare the cost of products in Moscow.

What arcs are used?

Unfortunately, there are no transparent arches that have the qualities necessary for braces. a classic metal arc is inserted into sapphire systems . It is a little noticeable during a conversation, but does not create the effect of “metal staples”.

In such systems, to maximize their aesthetics, you can use metal arches that have a white coating of a material similar to Teflon.

In this case, the braces become completely invisible. The only drawback of such arches is that the aesthetic coating can gradually wear off due to strong friction.

Basic rules for caring for teeth with braces

As mentioned above, proper care of the braces system begins with brushing your teeth. Using circular movements, it is necessary to clean each tooth from the outside and back. When using an electric toothbrush, it is strictly forbidden to press the head too hard against metal elements. This risks causing the bristles to break out and get stuck in the ligatures.

Next, you need to use a floss toothpick or a special brush to remove plaque from the interdental spaces. But to remove food debris directly from under the braces, waxed dental floss is suitable. To clean, you need to tear off about 30 centimeters of thread and carefully insert it under the staple. Then pull the thread under the rings and holes in the locks and make several cleaning movements. Repeat the procedure with each tooth. Next, you can begin to carry out the above-described care program directly for braces, after rinsing your mouth with salt water or a special solution.

Which systems are better and how do they differ?

At the moment, most orthodontists agree that to correct significant malocclusions, the ideal option is to install a metal brace system.

This is due to its reliability, maximum strength and the ability to use large forces to move teeth. However, it has one significant drawback - the metal on the outer surface of the teeth stands out and spoils the impression of a smile.

As opposed to metal, special ceramics and artificially grown sapphire crystals began to be used in orthodontics. Both of these materials are less durable than metal, but are strong enough to perform their functions .

The option of sapphire artificial crystals is most preferable for those for whom the aesthetic side of the issue is very important, since transparency and high light transmittance make them invisible.

Ceramic braces have properties similar to sapphire ones, but have a matte tint , which will be noticeable on white enamel. The strength of ceramics is almost the same as that of a transparent crystal. In addition, both materials do not stain during wear and retain their ideal appearance throughout the entire treatment period.

Differences between sapphire, ceramic and metal braces

Bracket systems are made from different materials, and therefore each option has its own differences, pros and cons:

• Classic metal braces. They cope well with various malocclusion pathologies and remain the most affordable. They are inferior to sapphire and ceramic products due to their not entirely aesthetic appearance.
• Ceramic braces are made from high-quality and hypoallergenic ceramics. They are almost invisible on the teeth, since the color of the ceramic is similar to the color of the teeth. They are suitable for correcting various malocclusion pathologies and are strong, durable and resistant to staining. However, if you regularly consume coloring foods and drinks, they may darken. Unlike metal products, they have a more aesthetic appearance. When comparing them with sapphire braces, cost plays a significant role. Ceramic braces are more affordable;
• Sapphire braces are a type of ceramic braces, but they are more transparent. Sapphire products are not painted. They are distinguished by their aesthetics, efficiency, and hypoallergenicity. However, at the same time, for most people such products in Moscow are too expensive.

Installation

Installation always takes place in several stages.

• Diagnostics. At the very beginning, the doctor conducts a complete diagnosis not only of the type of anomaly, but also of the entire oral cavity. Possible treatment options (for example, installation of a ligature or self-ligating system) are discussed with the patient. A visual examination is carried out, as well as detailed studies - orthopantomogram, photographs, etc.
• Preparation. Since the installation of sapphire braces can only be carried out on healthy teeth, the oral cavity is sanitized - all problems are eliminated (treatment of caries, other diseases) and professional hygiene is carried out.
• Taking impressions. Before making it, the doctor must take an impression of both jaws of the patient. This is necessary for making a working model and precise fitting of braces.
• Ordering braces and waiting for them to be made. The wait is inevitable, since in each case the installation is carried out purely individually - the location and shape of the bracket is determined for each tooth.
• Installation. In order to install braces, one visit is enough, but it requires from 1.5 to 3 hours of time spent in the dentist’s chair. The doctor secures each brace separately and only after that installs the arch

Price

The price of treatment usually includes:

• cost of sapphire braces for each jaw
• production according to individual parameters;
• diagnostics (orthopantomogram);
• work (installation, maintenance, removal);
• prolation;
• the cost of a permanent retainer (must be worn after the braces are removed).

By the way, you can find out what prices are for braces in CLINIK-PROFI ( CLICK ).

Whether to install sapphire braces is up to everyone to decide for themselves. The first thing that stops patients is the price of the pads. However, there is no need to skimp on your health. Choose a high-quality and aesthetic method of treatment. After its completion, your smile will become beautiful and your teeth will be healthy.

Next entry All about metal braces. Actually everything!

Who is it prescribed to?

Such orthodontic appliances are prescribed to patients who have relatively simple problems with the position of their teeth:

• malocclusion;
• spaces between teeth;
• torsion.

It is also important that people who may have allergic reactions to other materials can undergo treatment using such systems.

In this case, the age and gender of the patient (from 14 years old) do not matter. However, you should note that sapphire models are more suitable for patients with white tooth enamel . In the case of a natural yellowish color, aesthetics decreases, since the appliance becomes more noticeable on yellow teeth.

Rules of care

Despite the fact that sapphire braces do not change color while worn and are quite durable, there are still certain care rules that experts advise to adhere to.

1. Be sure to brush your teeth every morning and evening.
2. Use an additional toothbrush – a mono-beam one.
3. Use dental brushes and, if possible, an irrigator.
4. Avoid eating hard and very hard foods – nuts and other things.
5. Be sure to visit a doctor according to the schedule for preventive examinations and replacement of arches.

Adaptation

Reviews of sapphire braces indicate that they are easy to get used to. Only for a few days after installation of the system will there be some discomfort from the arc pressure.

Pronunciation, as evidenced by user comments, is not impaired, and there is no pain. Thanks to their small size, rounded, smoothed shapes, wearing sapphire braces does not cause any difficulties, and soon patients simply forget about their presence.