The perfect smile or how to straighten teeth without braces

Teeth filing technology has been used in dental practice since the beginning of the 19th century. At that time, this procedure was used as a preservative during the treatment of caries.

With the improvement of therapy methods and the expansion of the list of instruments used, this treatment technology was abandoned, however, in some situations, filing is still used.

Indications

There are opposing opinions among dentists regarding the procedure, but there are situations in which filing is necessary:

1. When installing crowns. For reliable fixation of the crown, it must fit tightly to the tooth surface.
   Since the anatomical shape of each molar or incisor is not ideal, grinding down of the upper layers of their hard tissue is required. This allows you to give your own bone organ the correct geometric shape, thanks to which the manufactured product is firmly fixed and does not stand out among other elements of the jaw row.
2. For fixing veneers. Ceramic plates fixed to the surface of your own teeth have a certain thickness.
   Therefore, in order for the installed microprostheses to fit firmly and not protrude beyond the boundaries of the native units, a small amount of hard tissue is ground off from the vestibular side of the elements of the jaw row.
3. Preparation for inlays. If it is necessary to mask the cavity formed as a result of carious lesions, ceramic or metal inlays can be used.
   Their fixation requires the creation of side walls and the formation of the required depth near the cavity.
4. In case of installation of an orthodontic structure. Cutting down a small thickness of the top layer of the tooth allows you to make room for correcting the position of the remaining elements of the row without the need to remove them.
   In addition, this option is often used in cases of increased crowding of teeth, since it facilitates the placement of fastening elements of the bracket system on them.
5. If there is damage to the enamel. Chips on the surface of the front incisors can be made less noticeable by slightly filing down the enamel.
   This improves the aesthetics of the appearance of the jaw row and eliminates the need for composite restoration.
6. In case of elongated incisors. If the front teeth are longer than the rest of the row, this can not only cause psychological discomfort, but also interfere with correct diction or complete chewing of food.
   To solve the problem, in some cases, filing the length of organs protruding from the common line is used.
7. At sharp angles. The anatomical structure of the anterior incisors is not always ideal. If there are sharp corners, dentists may recommend filing them down, which will increase the aesthetic appearance of the entire jaw row.

Indications for the use of orthoimplants and tactics for their installation.

Let's discuss here how the braces system works.

At this address https://orto-info.ru/ortodonticheskoe-lechenie/podgotovitelnyiy-period/separatsiya-zubov.html we will talk about abrasive teeth separation.

Structures with interlocking connections

For prosthetics of one or two teeth without turning adjacent units, the CBW prosthetic system can be used. Its features:

• Small canals with a diameter of about 1 mm and a length of 1.5-2 mm are formed on the lateral parts of the supporting teeth.
• Locks made of titanium or zirconium are inserted into these microcavities and secured with glue.
• The intermediate part of the prosthesis is fixed with installed locks.

This method makes it possible to save adjacent teeth, but it is more often used as a temporary option, since CBW systems cannot be called durable.

Contraindications

The necessity and admissibility of filing teeth is determined by the dentist individually in each case, since the procedure is quite labor-intensive and can be traumatic in some situations.

For this reason, sewing hard fabric is contraindicated in the following situations:

• increased abrasion of enamel;
• hyperesthesia;
• bruxism;
• presence of bad habits - frequent chewing of seeds and nuts, opening bottles with teeth;
• high risk of injury to the incisors, for example, boxing and other types of wrestling.

Technique

The procedure for filing teeth is carried out in several stages:

1. Preparation. At the first meeting, the dentist assesses the condition of the patient’s jawbone elements, determines whether there is a need for cutting down hard tissue and whether there are contraindications to the procedure.
2. Identifying problem areas. Using carbon paper, a liquid aerosol or a wax plate, the dentist determines the overestimated areas of the tooth. Areas that require sanding will be colored more intensely.
3. Sawing. The filing procedure may vary slightly depending on the goal to be achieved and the shape of the tooth being processed.
   So, when treating chewing molars, the dentist carefully grinds off the top layer of enamel from the surface of the tubercles. When cutting down the front incisors, multidirectional movements are carried out.

In some cases, it may be necessary to preliminary make a diagnostic model based on casts of the patient’s jaw rows.

The resulting gypsum sample is subjected to careful inspection and evaluation filing. Carborundum cutters or diamond burs are used as instruments for the operation

The procedure often ends with polishing and remineralization of the treated units. The dentist applies a certain composition containing a complex of useful substances to the enamel to increase the strength of the outer layer of the tooth and reduce permeability .

What are the alternatives to teeth straightening?

Filing is a violation of the integrity of the tooth, so in the future it is possible to increase tissue sensitivity. If the patient has minor cosmetic defects (for example, incisors of different heights), orthodontic treatment can be done without drilling. Before straightening your teeth, you need to consider all correction options: mouthguards, trainers, braces, aligners, and also compare the prices of teeth filing and orthodontic bite correction.

Based on: 5 votes

Increased sensitivity after the procedure

Many patients who have had their teeth filed complain of increased sensitivity, especially when eating hot and cold dishes and hard foods.

Dentists explain this phenomenon as follows. Dentin, located under the enamel, is penetrated by many tubules, inside of which nerve endings are located. As the thickness of the enamel decreases, pressure changes occur, which can cause pain when taking certain foods.

To reduce tooth sensitivity after the procedure, dentists recommend temporarily avoiding too hard foods, dishes with high and low temperatures, and acidic drinks.

During oral hygiene, you should use a brush with soft bristles and therapeutic and prophylactic toothpaste, rinses for sensitive teeth.

If sensitivity does not disappear a week after filing, you should contact your dentist.

Indications and contraindications for orthognathic surgery, recovery time.

In this article we will tell you how to install braces on crowns.

Follow the link https://orto-info.ru/ortodonticheskoe-lechenie/podgotovitelnyiy-period/informativnost-telerentgenogrammyi.html if you are interested in the importance of a teleroentgenogram in orthodontics.

At home

Fear of doctors and thoughts about the pain of professional manipulations often lead to patients trying to cope with the existing problem on their own. Teeth filing is also no exception.

Dentists share their experience that people often come to appointments whose enamel has been severely damaged by attempts to cut off part of it with various improvised tools in the desire to improve the aesthetic appearance of the jaw row with prominent front teeth or the presence of chips.

In addition to the problem of high sensitivity, these patients experience cracks in the hard tissue, as well as dentin damage, which develops as a result of bacteria entering the dentinal tubules through open pores.

The consequence of such independent actions can be the development of caries, pulpitis and numerous complications that can lead to partial or complete tooth destruction.

Dentists categorically prohibit performing teeth filing procedures at home. Only a specialist can determine the need for an operation to remove a section of enamel and carry it out efficiently, without the risk of complications.

Disadvantages of installing veneers without grinding

✔
If the tooth is not prepared before fixing the ceramic plate, then its surface is necessarily treated with a special acid, which irreversibly changes the color of the enamel to such an extent that it will not be possible to do without veneers in the future.

✔

Too thin lumineers, which do not require grinding of the teeth, are not able to effectively hide significant defects in the shape of the teeth.

✔

Read also:  Kalasept paste for the treatment of pulpitis, review of the product

Thin veneers without grinding make teeth visually thicker, which negatively affects their aesthetics.

✔

Grinding allows you to create a correct and smooth transition of the veneer into the tooth tissue. Installing veneers without grinding the teeth can cause plaque accumulation, gum inflammation and the formation of caries in the cervical area.

Price

The cost of filing teeth depends on the reasons for which it is carried out and what result is needed to achieve:

• preparation for caries - from 200 to 350 rubles per row element;
• treatment of enamel after removing braces – 550-650 rubles;
• identification of traumatic occlusion and grinding of one tooth – 200-300 rubles;
• cutting down a tooth for a crown – 130-200 rubles;
• filing a molar under an orthodontic structure – 150-200 rubles.

Find out how teeth are prepared in the video.

Veneers and teeth grinding are the main problems

Veneers are thin plates of ceramic or reflective composite materials used to correct the shape or color of teeth. Microprostheses have many advantages - high aesthetics, durability and reliability. But at the same time, the overlays have a significant drawback, which often becomes a reason for patients to refuse the procedure. We are talking about such an important stage as preparing the tooth before installing veneers.

Interesting fact!

Veneers were first invented in America in the 30s of the twentieth century. At first they were made to order for Hollywood stars, so that they would shine not only with their talents, but also with their perfect, dazzling smiles. However, at that time they were glued to the teeth for only a few days with a special adhesive mixture. Compared to modern orthopedic designs, these were primitive and crude onlays for quick correction of teeth during filming.