The nuances of dental trephination and what it is

740

Endodontic treatment of a tooth involves invading its internal cavities - the pulp chamber and root canals for treatment (vitalization) or removal of the pulp.

The location of the opening may be the bottom of the carious cavity or the undamaged, intact surface of the tooth.

The essence and purpose of manipulation

Tooth trephination (Greek Trypanon - trephine, drill) is the initial stage of endodontic treatment, which involves opening the top of the pulpous chamber, removing the pulp located in the coronal part, and creating access to the mouths of the tooth root canals.

This procedure is also called “crown expansion” or “endodontic coronal preparation.”

It should be noted that trephination does not involve expanding or changing the shape of the dental cavity and penetrating the tooth canals. Its more modest task is to open the crown cavity and provide access to the mouth of the root canals. The operation can be performed on both natural and artificial crowns.

According to the general medical classification, trephination is indicated by code A 16. 07. 092, where “A” means medical, indicating that this is a surgical intervention, “07” - that it is carried out in the oral cavity, and “092” indicates that this the procedure, in fact, is trepanation.

Does it hurt to put a crown on a tooth?

Having heard from the doctor that a crown will need to be placed on the tooth, the patient usually immediately begins to wonder - how painful and unpleasant will the procedure be for the patient? Let us answer this question honestly and in detail - unpleasant sensations cannot be completely eliminated during the treatment process. The most unpleasant part will be the preparation for prosthetics, during which the doctor will drill out the tooth, remove tissue damaged by caries, and also create access to the tooth canals.

The procedure for drilling a tooth, as well as treating its canals, can be very painful for the patient, so local anesthesia is required before performing these manipulations.

Modern clinics use strong anesthetics that can block pain impulses for several hours, and this time is usually enough for high-quality treatment of the tooth and its preparation for installation of a crown. The anesthetic is selected for the patient individually, taking into account possible contraindications and allergic reactions. But the process of installing dental crowns is painless for the patient, since the finished prosthesis is placed on pulpless teeth from which the nerve bundle has been removed.

Indications

Trephination is the first stage of endodontic treatment; it is indicated in all cases where it is necessary to penetrate inside the tooth for its treatment (vitalization or pulp removal, obturation of dental canals, installation of a pin or other operations).

Most often, trepanation is performed in the following cases.

The presence of a deep carious cavity in the area of the clinical crown of the tooth with a thin or completely absent septum between it and the pulpous chamber.
Even if the thin wall is preserved, it is capable of allowing pathogenic microorganisms to pass through, resulting in possible infection of the pulp. Therefore, if appropriate symptoms are present, the doctor may consider trepanation of the tooth necessary.
Chronic or acute pulpitis.
Any form of periodontitis.

A contraindication to trepanation is the impossibility of restoring the functionality of the tooth and the need for its removal:

impassable, curved root canals;
severe periodontal damage;
tooth root fracture.

In all these cases, the tooth is simply removed.

Why does a tooth hurt when you press it, and what to do in such a situation.

Visit here to learn more about the signs of dental pulp necrosis.

At this address we will tell you whether garlic works against toothache.

Causes of toothache under a crown

The list of factors that can provoke an inflammatory process even under a recently installed crown is:

Hypothermia of the body.
Decreased immunity; previously suffered acute respiratory diseases; viral infections.
Failure of the crown (i.e. the crown has expired its service life) each orthopedic design has its own service life, therefore, in order to avoid pain in the tooth under the crown, it is necessary to undergo a professional examination. dental examination every 6 months.
Chronic dental injuries. (if the filling on the antagonist tooth is too high)
Acute injury (fall and bruise or damage in a fight).

Preparatory stage

Trepanation should be preceded by a diagnosis, a complete assessment of the condition of the crown of the tooth, its roots, and periodontal tissues.

To achieve this, the following activities are carried out:

Questioning the patient regarding complaints. Inspection and probing of the tooth to determine the presence and depth of carious cavities in the clinical crown. Assessing the condition of the gums in the area of the problem tooth. If there are fillings, their condition is assessed.
Electroodontometry. Determination of the condition of the pulp by its reaction to electric current.
X-ray of the tooth. This is a mandatory and very important stage in endodontic treatment.
Using fluoroscopy, the number and condition of root canals, their length, and anatomical shape are determined. The shape and dimensions of the pulp chamber, the thickness of its walls and lid are established. The presence of lateral canals, pathological changes in the tooth ligament.

By applying the bur to the radiograph, the required size of the instrument and its correct direction when opening the tooth are determined.

Before treatment, professional cleaning of the entire dental cavity or just a segment of the jaw arch with the element being prepared may be necessary.

How is tooth preparation done?

The choice of preparation method directly depends on:

clinical situation,
technical equipment of the dental clinic,
client's wishes.

Grinding of pulpless teeth is carried out without anesthesia (except for those cases when the doctor has to use special threads to move the gums back). If the procedure is performed on living (vital) teeth, the patient may require local anesthesia.

Grinded teeth are necessarily protected with temporary crowns. This allows you to keep damaged dental tissues in an acceptable condition until they are covered with a permanent prosthesis.

Teeth preparation should be carried out only in specialized medical institutions that have positively proven themselves in the dental services market. Only a professional and competent approach to the procedure allows not only to achieve the desired result, but also to avoid the development of complications.

Sequence of doctor's actions

Trepanation involves three main stages:

local anesthesia;
tooth isolation by applying a rubber dam;
directly opening the crown.

After anesthesia and the application of a rubber dam, the doctor proceeds directly to trepanation. The preparation is performed using a turbine drill with a diamond or carbide bur with a supply of coolant.

First, the crown is opened - installed by drilling a point connection between the bottom of the carious cavity or the intact surface of the tooth with its internal cavity.

Then the coronal cavity is opened - the edges of the enamel-dentin cap overhanging it are removed. Dentin sawdust and necrotic tissue are washed off with liquid.

The coronal part of the pulp is removed with a sharp excavator and EDTA (sodium salt dihydrate, which softens surface dentin) and disinfectant sodium hypochlorite are supplied into the cavity.

The walls of the cavity and the mouth of the dental canals are not additionally prepared. The main thing is that they are clearly visible and access to the dental canals is provided.

At this point, the trephination of the tooth ends and the next stage of endodontic treatment begins according to indications.

In the video, watch the process of tooth trephination.

Main types of tooth preparation

In modern dental practice, five main methods of tooth preparation are used:

tunnel;
laser;
ultrasonic;
chemical;
air-abrasive.

Tunnel preparation

For tunnel turning of abutment teeth, turbine units are used, equipped with speed regulators, as well as metal or diamond tips.

Advantages of the tunnel view

The main advantage of this technique is the ability to control the thickness of the removed layer of dental tissue.

Disadvantages of the tunnel view

The disadvantages of tunnel grinding of teeth include:

severe overheating of the enamel;
increased risk of injury to the soft tissues of the mouth if the technique of performing the procedure is violated;
a high probability of cracks and microscopic chips appearing on hard dental tissues when using worn out or low-quality instruments.

Laser preparation

For laser preparation, pulsed lasers are used to heat the water contained in the hard dental tissues and destroy the integrity of the enamel and dentin. Pieces of sanded fabric are cooled and removed using a special air-water mixture.

Advantages of the laser type

The advantages of laser tooth preparation include:

high turning speed;
safety (no equipment elements rotating at high speed);
absence of noise from the operation of laser equipment;
low heating temperature of the treated tissues;
no cracks or chips on the edges of the pin.

Ultrasonic preparation

With ultrasonic preparation, the grinding of teeth is carried out due to high-frequency vibration of the dental instrument under the influence of ultrasound.

Advantages of Ultrasonic View

The main advantages of this method are:

no negative effect of ultrasonic waves on pulp tissue;
release of a small amount of thermal energy that is not capable of causing significant overheating of dentin and enamel;
painlessness;
no chips or cracks on the pin stacks.

Air abrasive preparation

When using air-abrasive tooth preparation, instead of a drill with a rotating drill, an abrasive-air mixture is used, supplied to the desired area under high pressure. When abrasive powder gets on enamel or dentin, tissue destruction occurs.

Advantages of the air-abrasive type

The advantages of this turning method are:

absence of tissue overheating and excessive vibration;
high speed of the procedure and its relative simplicity;
maintaining the maximum volume of dental tissue;
painlessness of the performed manipulations.

Chemical preparation

The chemical preparation method of teeth involves softening enamel and dentin using acids and other active chemicals.

Advantages of the chemical type

The advantages of this technique include:

absence of microcracks and chips on the treated surface;
painlessness;
absence of thermal damage to dental tissues.

Disadvantages of the chemical type

The only disadvantage of chemical preparation is the long duration of the procedure.

Some nuances

The starting point for opening the pulpous chamber should be located at the bottom of the caries lesion or on the intact surface of the tooth closest to the pulp, that is, at the site of the pulp horn. The moment the drill enters the cavity manifests itself as a feeling of “sinking” of the instrument.

When is a rubber dam applied?

There is no consensus. Some experts recommend doing this before opening the cavity, others - after opening. The latter explain their choice by the fact that the absence of a rubber dam at the stage of opening the cavity helps to more accurately guide the tool.

Trepanation technique

Trephination methods vary somewhat depending on the group of teeth and their location (upper or lower jaw).

Technique for preparing incisors and canines

The carious cavity on the cutting surfaces of the incisors and canines is transferred to the lingual/palatal surface, and only then the pulpous chamber is opened.

Preparation of intact incisors and canines begins from their lingual/palatal surface - from its central point. Preparation from the cutting edge can lead to destruction (breakage) of the lateral surface of the incisor or canine. The intact incisors are exposed in the area of the blind fossa.

During trephination, the instrument is first directed perpendicular to the palatal or lingual surface of the canine or incisor. After the hole is formed, the drilling direction is changed to parallel to the longitudinal axis of the tooth.

Trepanation of premolars

In premolars, carious cavities begin to be opened from their bottom in the place closest to the pulp. In this case, they try to transfer the preparation to the chewing surface.

The opening point for intact premolars should be located on the occlusal surface in the middle of the fissures. When drilling, the bur is directed towards the most pronounced tubercle.

The dental cavity should be opened in the palatal-buccal direction. Doing this in a mesial or distal direction is not recommended, since this quite often leads to perforation of the walls of the coronal cavity.

The opened cavity should have a round or oval shape.

Molar preparation

Carious cavities in the molars of the upper jaw are trepanned in the same way as premolars. During opening, the bur is directed in the palatal-buccal direction.

Lower intact molars have their own opening characteristics. The bur entry point should be located in the middle of the longitudinal fissure. The instrument is directed towards the anterior buccal cusp. Unlike maxillary painters, the cavities open in the mesial-distal direction. Buccolingual opening is considered faulty.

The second and third maxillary molars are the most difficult for trephination due to the different structures of their crowns.

Difficulty identifying canal mouths

If the orifices of the root canals are poorly identified, their location is established using a dye that colors the entrances to the canal dark blue.

What is the danger of chronic caries and its treatment tactics.

In this publication you will find instructions for using a caries marker.

Here is all the most important information about fissure caries.

Possible complications

Coronal preparation is less risky in terms of complications than root preparation. However, they still happen:

Perforation of the wall of the pulpous chamber. The reason is the carelessness of the dentist, the wrong choice of instrument, the lack of an x-ray, which determines the shape of the cavity.
If the hole is small and the perforation site is located above the periodontal groove, the defect can be easily eliminated - with the help of cement.
If the hole is larger than 1.5 mm, and the perforation is located below the periodontal groove, there is a risk of filling material leaking into the periodontium, which can lead to inflammation.
Broken tool. Occurs due to excessive application of force, the use of low-quality instruments, poor condition of the crown, and the doctor ignoring the shape of the cavity.
Change in color (darkening) of the crown . The reasons are a violation of the operating mode of the tool (high speed, lack of cooling), improper processing of the cavity walls.
Pain. They may appear after the instrument enters the periodontium, when working without cooling, or due to poor-quality antiseptic treatment (re-infection).

In general, complications are caused by preparation errors, lack of cooling, incorrect choice of instrument, and lack of high-quality x-rays. To avoid them, you need to strictly follow the operation protocol.

Reviews

The vast majority of visitors to dental offices are familiar with tooth trephination, which everyone simply calls “drilling.”

If you are one of them, and some special incident happened to you during tooth trephination, share your experience with other visitors to our site. You can do this by filling out the form at the bottom of this page.

If you find an error, please select a piece of text and press Ctrl+Enter.

Tags toothache

Did you like the article? stay tuned

In what cases are braces + springs used and how effective?

What you need to know about supraocclusion